The Dixon-Bate Shocklink Mark II HD fits between the towing vehicle and trailer - absorbs drawbar shock and vibration whilst reducing driver fatigue!
When towing the Shocklink Mark II 'floats' in a vertical direction as the trailer reacts to changes in the road surface.
The Shocklink Mark II HD uses two springs and rubber snubbers to effectively absorb up to 70% of the load, resulting in a much smoother ride and reducing the potential risk of damage to the trailer.

Will it fit my vehicle?
For 4wd & light commercial vehicles up to 2800kgs Gross Vehicle Weight (GVM), Gross Trailer Weight 3500kg & max S Value (Noseload) of 100 kgs use Shocklink Mark II.

The Shocklink MarkII HD is only available as an adjustable height version designed to fit vehicles fitted with either a Dixon-Bate adjustable height towbar or via an adapter plate onto an existing vehicle towbar (see exceptions below). 

Exceptions
Pre-August 1998 registrations: Shocklink Mark II can be fitted to the existing towbar using the adapter plate if the towbar has 4 coupling holes and that there is sufficient clearance around the bumper.

Eu Approved Vehicles August 1994 on: Only fit the adapter plate after first checking with the towbar manufacturer that doing so will not invalidate the towbars’ approval!

Includes coupling plate pre-drilled with two holes at 90mm centres.

Designed to accept standard towballs, universal couplings & jaws with coupling holes to BS Au 114a.

Adjustable height version only.
Suitable for use with stabilisers.

What do I get?
Includes two pins & clips for fitting either to an adjustable height frame or adapter plate.

M16 coupling bolts supplied (refer to instructions for correct length)

Fitting Instructions

(Prices subject to VAT and exclude delivery)