The Dixon-Bate Commercial Shocklink Adjustable fits between the towing vehicle and trailer - absorbs drawbar shock and vibration whilst reducing driver fatigue!
When towing the Commercial Shocklink Adjustable 'floats' in a vertical direction as the trailer reacts to changes in the road surface.
The Commercial Shocklink Adjustable uses two springs and rubber snubbers to effectively absorb up to 70% of the load, resulting in a much smoother ride and reducing the potential risk of damage to the trailer.

Will it fit my vehicle?
For light commercial vehicles up to 16000kgs Gross Vehicle Weight (GVM), Gross Trailer Weight 3500kg & max S Value (Noseload) of 100 kgs use the Commercial Shocklink Adjustable.

The Commercial Shocklink Adjustable is designed to fit either an adjustable height.coupling or existing vehicle towbars using four bolt fixing.

Exceptions
Pre-August 1998 registrations: Shocklink Mark II can be fitted to the existing towbar using the adapter plate if the towbar has 4 coupling holes and that there is sufficient clearance around the bumper.

Eu Approved Vehicles August 1998 on: Only fit the adapter plate after first checking with the towbar manufacturer that doing so will not invalidate the towbars’ approval!

Includes coupling plate pre-drilled with two holes at 90mm centres.

Designed to accept standard towballs, universal couplings & jaws with coupling holes to BS Au 114a.

Adjustable height version only.
Suitable for use with stabilisers.

What do I get?
Includes two pins & clips for fitting either to an adjustable height frame or adapter plate.

M16 coupling bolts supplied (refer to instructions for correct length)

Fitting Instructions

(Prices subject to VAT and exclude delivery)